Xerox VersaLink B70 Series User Manual page 202

Troubleshooting
General Troubleshooting
This section contains procedures to help you locate and resolve problems. Resolve some problems by
simply restarting the printer.
P P r r i i n n t t e e r r D D o o e e s s N N o o t t P P o o w w e e r r O O n n
Probable Causes
The power switch is not switched on.
The power cord is not plugged into the outlet
correctly.
The power cord is not secured in place correctly.
Something is wrong with the outlet connected to the
printer.
The printer is connected to an outlet with a voltage
or frequency that does not match the printer
specifications.
Caution: Plug the three-wire cord with grounding prong directly into a grounded AC outlet.
P P r r i i n n t t e e r r R R e e s s e e t t s s o o r r P P o o w w e e r r s s O O f f f f F F r r e e q q u u e e n n t t l l y y
Probable Causes
The power cord is not plugged into the outlet
correctly.
The power cord is not secured in place correctly.
A system error occurred.
202 Xerox ® VersaLink
User Guide
® B70XX Multifunction Printer
Solutions
• Open the front door, then and check that the
power switch is in the On position.
• At the printer control panel, press the Power/
Wake button. For details, refer to
Printer.
Power off the printer, then plug the power cord into
the outlet securely. Use the bracket provided with the
printer to secure the power cord in place.
Use the bracket provided with the printer to secure
the power cord in place.
• Plug another electrical appliance into the outlet
and check if it operates properly.
• Try a different outlet.
Use a power source with the specifications listed in
the Electrical Specifications.
Solutions
Power off the printer, confirm that the power cord is
plugged in correctly to the printer and the outlet,
then power on the printer.
Use the bracket provided with the printer to secure
the power cord in place.
Power off the printer, then power on again. Print the
Error History Report. For details, refer to
Powering On the
Printing the