Xerox VersaLink B70 Series User Manual page 158

Paper and Media
3. To move out the length or width paper guides, pinch the guide locks, then slide out the length or
width paper guides.
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you
are ready to use it.
5. Load paper in the tray. Do one of the following:
• For long-edge feed:
– Insert letterhead and pre-printed paper face up with the top edge toward the back.
– Load hole-punched paper with the holes to the left.
• For short-edge feed:
– Insert letterhead and pre-printed paper face up with the top edge to the left.
– Load hole punched paper with the holes toward the front of the printer.
158 Xerox ® VersaLink
User Guide
® B70XX Multifunction Printer