Table of Contents
Advertisement
To change the paper size in Tray 6, refer to
1. Pull out Tray 6 from the high-capacity feeder until it stops. Open the side gate until it stops.
2. Wait for the tray to lower and stop.
3. The control panel displays the paper tray settings. Ensure that you load the correct paper type
into the tray.
Note:
Do not load custom-size paper into Tray 6.
4. Fan the edges of the paper before loading it into the paper trays. This procedure separates any
sheets of paper that are stuck together and reduces the possibility of paper jams.
Note:
To avoid paper jams and misfeeds, do not remove paper from its packaging
until necessary.
5. Load the paper against the right side of the tray.
Configuring Tray
6.
Xerox
®
VersaLink
Paper and Media
®
B70XX Multifunction Printer
User Guide
165
Advertisement
Table of Contents
