Chapter 2 Installation Preparation; Caution Of Usage; Safety Advice; Safety Principles - Bdcom S3756P Hardware Installation Manual

Chapter 2 Installation Preparation

2.1 Caution of Usage

Similar to other electronic products, the semiconductor chip easily gets damaged if you power
on or off abruptly and frequently. To restart up the switch of S3756P, you have to open the power
on-off after the power is cut down for three to five seconds.
Avoid severe collision or falling down from the height to protect the parts in the switch.
Use correct outside ports to connect the switch of S3756P. Do not put the Ethernet plug into
the console port (RJ45 8-line socket). Similarly, do not put the console cable into the console port
(RJ45 8-line socket).
Note:
1) When you plug or dial the power line, keep the power line horizontal with the power socket.
2) When the lifetime of our products ends, handle them according to national laws and
regulations, or send these products to our company for collective processing.

2.2 Safety Advice

2.2.1 Safety Principles


Keep dustless and clean during or after the installation.

Put the cover at the safe place.

Put tools at the right place where they are not easily falling down.

Put on relatively tight clothes, and fasten the tie or scarf well and roll up the sleeve,
avoiding stumbling the machine box.

Put on the protective glasses if the environment may cause damage to your eyes.

Avoid incorrect operations that may cause damage to human or devices.

2.2.2 Safety Notices

The safety notices mentioned here means that improper operation may lead to body damage.
S3756P Hardware Installation Manual
- 5 -