Table 21: Debug; Figure 58: Capture Page - Grandstream Networks GWN7600 User Manual

To access Capture page, go to System Settings→Debug→Capture.
The below table will show different fields used on debug page:
Required Options
File Name Enter the name of the capture file that will be generated.
Interface Choose a SSID as Interface on which the traffic will be captured.
Device Choose a device plugged to USB port to save the capture once started.
Advanced Options
File Size Set a File size that the capture will not exceed.
Rotate Count Set a value for rotating captures.
Choose if you want to get all traffic or only outgoing or incoming to the chosen
Direction
interface.

Figure 58: Capture Page

Table 21: Debug

GWN7600/GWN7600LR User Manual
Version 1.0.6.41
P a g e |
74