System Settings; Maintenance; Basic; Upgrade - Grandstream Networks GWN7600 User Manual

Maintenance

Users can access Maintenance page from GWN7600/GWN7600LR WebGUI→System Settings→
Maintenance.

Basic

Basic page allows Country and Time configuration.
Field
Web HTTP Access
Web HTTPS Port
Country
Scene
Time Zone
NTP Server
Date Display Format

Upgrade

The Upgrade Web page allows upgrade related configuration.
Field
Authenticate Config File
XML Config File Password

SYSTEM SETTINGS

Table 17: Basic

Description
Enables Web HTTP Access. By default, it's disabled.
Specifies HTTPS port. By default, is 443.
Select the country from the drop-down list. This can affect the number of
channels depending on the country standards.
Configure whether to enable/disable 5.150-5.350GHz (channels 36-64) for
outdoor usage in order to follow some countries regulations.
Note:
This option is only available for certain countries and only effective
-
for outdoor type of access points.
This Option is only applicable for GWN7600LR Only.
-
Configure time zone for the GWN7600/GWN7600LR.
Make sure to reboot the device to take effect.
Configure the IP address or URL of the NTP server. The device will obtain
the date and time from the configured server.
Change the Date Display Format, three options are possible YYYY/MM/DD,
MM/DD/YYYY and DD/MM/YYYY

Table 18: Upgrade

Description
Authenticate configuration file before acceptance. Default is disabled.
Enter the password for encrypting the XML configuration file using OpenSSL.
The password is used to decrypt the XML configuration file if it is encrypted
via OpenSSL.
GWN7600/GWN7600LR User Manual
Version 1.0.6.41
P a g e |
70