Figure 65: Access Points - Grandstream Networks GWN7600 User Manual

To upgrade a slave access point, log in to the GWN7600/GWN7600LR acting as Master Controller and go
to Access Points.
Make sure that firmware server path is set correctly under Maintenance, check the desired APs to upgrade,
and click on
The status of the device will show Upgrading, wait until it finishes and reboots, then it will appear online
again.
----------------------------------------------------------------------------------------------------------------------------- --------------
-
Notes:
•
Please do not interrupt or power cycle the GWN7600/GWN7600LR during upgrading process.
•
The Master Access
Settings→Maintenance. It cannot be upgraded from Access Points page like the Paired Access
Points.
-------------------------------------------------------------------------------------------------------------------------------------------
-
Service providers should maintain their own firmware upgrade servers. For users who do not have
TFTP/HTTP/HTTPS server, some free windows version TFTP servers are available for download from
http://www.solarwinds.com/products/freetools/free_tftp_server.aspx
http://tftpd32.jounin.net
Please check our website at
Instructions for local firmware upgrade via TFTP:

Figure 65: Access Points

to upgrade the selected paired access points.
Point needs to
http://www.grandstream.com/support/firmware
GWN7600/GWN7600LR User Manual
Version 1.0.6.41
be upgraded from Web
for latest firmware.
GUI→System
P a g e |
83