Grandstream Networks GWN7600 User Manual page 45

WEP Key
WPA Key Mode
WPA Encryption Type
WPA Pre – Shared Key
Client Bridge Support
RADIUS Sever Address
RADIUS Server Port
RADIUS Server Secret
RADIUS Accounting Server
RADIUS Accounting Server
Port
RADIUS Accounting Server
Secret
Client Time Policy
Use MAC Filtering
Enter the password key for WEP protection mode.
Two modes are available:
•
PSK: Use a pre-shared key to authenticate to the Wi-Fi.
•
802.1X: Use a RADIUS server to authenticate to the Wi-Fi.
Two modes are available:
•
AES: This method changes dynamically the encryption keys
making them nearly impossible to circumvent.
•
AES/TKIP: use both Temporal Key Integrity Protocol and
Advanced Encryption Standard for encryption, this provides the
most reliable security.
Set the access key for the clients, and the input range should be: 8-63
ASCII characters or 8-64 hex characters.
Configures the client bridge support to allow the access point to be
configured as a client for bridging wired only clients wirelessly to the
network. When an access point is configured in this way, it will share the
WiFi connection to the LAN ports transparently. Once a SSID has an Client
Bridge Support enabled, the AP adopted in this SSID can be turned in to
Bridge Client mode by click the Bridge button.
Configures RADIUS authentication server address.
Configures RADIUS Server Listening port (default is: 1812).
Enter the secret password for client authentication with RADIUS server.
Configures the address for the RADIUS accounting server.
Configures RADIUS accounting server listening port (defaults to 1813).
Enter the secret password for client authentication with RADIUS
accounting server.
Select a time policy to be applied to all clients connected to this SSID.
Choose Blacklist/Whitelist
excluded/included from connecting to the zone's Wi-Fi. Default is
Disabled.
GWN7600/GWN7600LR User Manual
Version 1.0.6.41
to specify MAC addresses to be
P a g e |
45