Ping/Traceroute; Table 7: Debug - Grandstream Networks GWN7600 User Manual

The below table will show different fields used on debug page.
File Name Enter the name of the capture file that will be generated.
Interface Choose a network group as Interface on which the traffic will be captured.
Device Choose a device plugged to USB port to save the capture once started.
File Size Set a File size that the capture will not exceed (Optional field).
Set a value for rotating captures (Optional Field).
Rotate Count
Choose if you want to get all traffic or only outgoing or incoming to the choses
Direction
interface.
Source Port Set the Source Port to filter capture traffic coming from the defined source port.
Destination Port Set the Destination Port to filter capture traffic coming from the defined port.
Set the Source IP to filter capture traffic coming from the defined source IP.
Source IP
Set the Destination IP to filter capture traffic coming from the defined destination
Dest IP
IP.
Choose ALL or a specific protocol to capture (IP, ARP, RARP, TCP, UDP, ICMP,
Protocol
IPv6)

Ping/Traceroute

Ping and Traceroute are useful debugging tools to verify reachability with other clients across the network.
The GWN7600 offers both Ping and Traceroute tools for IPv4 and IPv6 protocols. To use these tools, go to
GWN7600 WebGUI->System Settings->Debug and click on Ping/Traceroute.

Table 7: Debug

GWN7600 User Manual
P a g e | 34