Time Policy
The timed client disconnect feature allows the system administrator to set a fixed time for which clients
should be allowed to connect to the access point, after which the client will no longer be allowed to connect
for a user configurable cool-down period.
The configuration is based on a policy where the administrator can set the amount of time for which clients
are allowed to connect to the WiFi and reconnect type and value after which they will be allowed to connect
back after they have been disconnected.
In order to create a new policy, go under Clients→Time Policy and add new one., then the following
parameters:
Option
Name
Enabled
Limit Client Connection Time
Figure 41: Blacklist Access List
Table 11: Time Policy Parameters
Description
Enter the name of the policy
Check the box to enable the policy
Sets amount of time a client may be connected.
GWN7600/GWN7600LR User Manual
Version 1.0.6.41
P a g e
|
50