Using Gwn7600/Gwn7600Lr As Standalone Access Point; Connect To Gwn7600/Gwn7600Lr Default Wi-Fi Network; Figure 22: Mac Tag Label - Grandstream Networks GWN7600 User Manual
Mid-tier/outdoor long range, 802.11ac wave-2 wifi access point
Hide thumbs
Also See for GWN7600:
- User manual (102 pages) ,
- Quick installation manual (48 pages) ,
- Deployment manual (35 pages)
Table of Contents
Advertisement
USING GWN7600/GWN7600LR AS
STANDALONE ACCESS POINT
The GWN7600/GWN7600LR can be used in Standalone mode, where it can act as Master Access Point
Controller or in Slave mode and managed by another GWN76xx Master.
This section will describe how to use and configure the GWN7600/GWN7600LR in standalone mode.
Connect to GWN7600/GWN7600LR Default Wi-Fi Network
GWN7600/GWN7600LR can be used as standalone access point out of box, or after factory reset with Wi-
Fi enabled by default.
After powering the GWN7600/GWN7600LR and connecting it to the network, GWN7600/GWN7600LR will
broadcast a default SSID based on its MAC address GWN [MAC's last 6 digits] and a random password.
Note that GWN7600/GWN7600LR's default SSID and password information are printed on the MAC tag
of the unit as shown on the below figure.
Figure 22: MAC Tag Label
P a g e
|
34
GWN7600/GWN7600LR User Manual
Version 1.0.6.41
Hide quick links:
Advertisement
Table of Contents
