Grandstream Networks GWN7600 User Manual page 46

Mid-tier/outdoor long range, 802.11ac wave-2 wifi access point
Hide thumbs Also See for GWN7600:
Table of Contents

Advertisement

Client Isolation
Gateway MAC Address
RSSI Enabled
Minimum RSSI (dBm)
Enable Voice Enterprise
Client isolation feature blocks any TCP/IP connection between connected
clients to GWN7600/GWN7600LR's Wi-Fi access point. Client isolation
can be helpful to increase security for Guest networks/Public Wi-Fi.
Three modes are available:
• Internet Mode: Wireless clients will be allowed to access only the
internet services and they cannot access any of the management
services,
either
on
GWN7600/GWN7600LR.
• Gateway MAC Mode: Wireless clients can only communicate with
the gateway, the communication between clients is blocked and
they cannot access any of the management services on the
GWN7600/GWN7600LR access points.
Radio Mode: Wireless clients can access to the internet services,
GWN7xxx router and the access points GWN7600/GWN7600LR but
they cannot communicate with each other.
This field is required when using Client Isolation, so users will not lose
access to the Network (usually Internet). Type in the default LAN
Gateway's MAC address (router's MAC address for instance) in
hexadecimal separated by ":". Example: 00:0B:82:8B:4D:D8
Check to enable RSSI function, this will lead the AP to disconnect users
below the configured threshold in Minimum RSSI (dBm).
Enter the minimum RSSI value in dBm. If the signal value is lower than the
configured minimum value, the client will be disconnected. The input range
is from "-94" or "-1".
Check to enable/disable Voice Enterprise. The roaming time will be
reduced once enable voice enterprise.
The 802.11k standard helps clients to speed up the search for
nearby APs that are available as roaming targets by creating an
optimized list of channels. When the signal strength of the current
AP weakens, your device will scan for target APs from this list.
When your client device roams from one AP to another on the
same network, 802.11r uses a feature called Fast Basic Service
Set Transition (FT) to authenticate more quickly. FT works with
both pre-shared key (PSK) and 802.1X authentication methods.
GWN7600/GWN7600LR User Manual
Version 1.0.6.41
the
router
nor
the
access
points
P a g e
|
46

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gwn7600lr

Table of Contents