Wall and Ceiling Mount Installation for GWN7600
GWN7600 can be mounted on the wall or ceiling, please refer to the following steps for the appropriate
installation.
Wall Mount
Step1:
Position the mounting bracket at the desired location on the wall
with the arrow pointing up.
Step 2:
Use a pencil to mark the four mounting holes (screw holes DIA
5.5mm, reticle hole DIA 25mm).
Step 3:
Insert screw anchors into the 5.5 mm holes. Attach the mounting
bracket to the wall by inserting the screws into the anchors.
Step 4:
Connect the power cable and the Ethernet cable (RJ45) to the
correct ports of your GWN7600.
Step 5:
Align the arrow on the GWN7600 AP with the arrow on the locking
tab of the mounting bracket and ensure that your GWN is firmly
seated on the mounting bracket.
Step 6:
Turn the GWN clockwise until it locks into place and fits the locking
tab.
GWN7600/GWN7600LR User Manual
Version 1.0.6.41
Figure 5: Wall Mount – Steps 1 & 2
PA3.5 x 20 screw
Plastic Expansion Bolt
Figure 6: Wall Mount – Steps 3 & 4
Figure 7: Wall Mount – Steps 5 & 6
P a g e
|
24