Debug
GWN7600LR offers many features for managing and monitoring connected clients to network groups, as
well as debugging and troubleshooting
Core Files
The Core Files Web page displays core dumps generated when the GWN7600LR crashes. This is helpful
for troubleshooting purposes, if any core dump found on this page please help to contact our support team
for further investigation using following link:
Ping/Traceroute
Ping and Traceroute are useful debugging tools to verify reachability with other clients across the network.
The GWN7600LR offers both Ping and Traceroute tools for IPv4 and IPv6 protocols.
To use these tools, go to GWN7600LR WebGUISystem SettingsDebug and click on Ping/Traceroute.
•
Next to Tool choose from the dropdown menu:
IPv4 Ping for an IPv4 Ping test to Target
-
IPv6 Ping for an IPv6 Ping test to Target
-
IPv4 Traceroute for an IPv4 Traceroute to Target
-
IPv6 Traceroute for an IPv6 Traceroute to Target
-
•
Type in the destination's IP address in Target field.
•
Click on Run.
https://helpdesk.grandstream.com/
Figure 38: IP Ping
GWN7600LR User Manual
P a g e
|
54