Access; Table 19: Access - Grandstream Networks GWN7600 User Manual

Upgrade Via
Firmware Server
Config Server
Check/Download New
Firmware at Boot
Allow DHCP options 66
and 43 override
Automatic Upgrade(m)
Reboot
Download Configuration
Upload Configuration
Upgrade Now
Factory Reset

Access

The Access Web page provide configuration for admin and user password.
Field
Current Administrator
Password
New Administrator
Password
Confirm New
Administrator Password
New User Password
Confirm New User
Password
Specify uploading method for firmware and configuration. 3 options are
available: HTTP, HTTPS and TFTP.
Configure the IP address or URL for the firmware upgrade server.
Configure the IP address or URL for the configuration file server.
Choose whether to enable or disable automatic upgrade and provisioning
after reboot. Default is disabled.
Configure whether to allow DHCP options 66 and 63 to override the upgrade
and provisioning setting.
Specify the time to check for firmware upgrade (in minutes).
Click on Reboot button to reboot the device.
Click on Download to download the device's configuration file.
Click on Upload to upload the device's configuration file.
Click on Upgrade, to launch firmware/config file provisioning.
Please make sure to Save and Apply changes before clicking on Upgrade.
Click on Reset to restore the GWN7600/GWN7600LR to factory default
settings

Table 19: Access

Description
Enter the current administrator password
Change the current password. This field is case sensitive with a maximum
length of 32 characters.
Enter the new administrator password one more time to confirm.
Configure the password for user-level Web GUI access. This field is case
sensitive with a maximum length of 32 characters.
Enter the new User password again to confirm.
GWN7600/GWN7600LR User Manual
Version 1.0.6.41
P a g e |
71