Provisioning And Backup; Download Configuration; Upload Configuration; Configuration Server (Pending) - Grandstream Networks GWN7600 User Manual

1. Unzip the firmware files and put all of them in the root directory of the TFTP server;
2. Connect the PC running the TFTP server and the GWN7600/GWN7600LR to the same LAN segment;
3. Launch the TFTP server and go to the File menu→Configure→Security to change the TFTP server's
default setting from "Receive Only" to "Transmit Only" for the firmware upgrade;
4. Start the TFTP server and configure the TFTP server in the GWN7600/GWN7600LR web configuration
interface;
5. Configure the Firmware Server to the IP address of the PC;
6. Update the changes and reboot the GWN7600/GWN7600LR.
End users can also choose to download a free HTTP server from
Microsoft IIS web server.

Provisioning and Backup

The GWN7600/GWN7600LR configuration can be backed up locally or via network. The backup file will
be used to restore the configuration on GWN7600/GWN7600LR when necessary.

Download Configuration

Users can download the GWN7600/GWN7600LR configuration for restore purpose under Web
GUI→System Settings→Maintenance→Upgrade.
Click on to download locally the configuration file.

Upload Configuration

Users can upload configuration file to the GWN7600/GWN7600LR under Web GUI→System
Settings→Maintenance→Upgrade.
Click on to browse for the configuration to upload.
Please note that the GWN7600/GWN7600LR will reboot after the configuration file is restored successfully.

Configuration Server (Pending)

Users can download and provision the GWN7600/GWN7600LR by putting the config file on a TFTP/HTTP
or HTTPS server and set Config Server to the TFTP/HTTP or HTTPS server used in order for the
GWN7600/GWN7600LR to be provisioned with that config server file.
GWN7600/GWN7600LR User Manual
Version 1.0.6.41
http://httpd.apache.org/ or use
P a g e |
84