Setting An Aspect Ratio To Output Hdmi Video Signals; Setting The Use Of Hdmi Control; Setting The Audio Jack Used For Tv Audio Input; Setting The Use Of Arc - Yamaha Aventage RX-A780 Owner's Manual

Setting an aspect ratio to output HDMI video signals

Selects an aspect ratio to output HDMI video signals when "Video Mode" is set to
"Processing".
Note
For details on "Video Mode" in the "Setup" menu, see the following:
▪ "Setting the use of the video signal processing" (p.127)
Setup menu
"Video/HDMI" > "Video Mode" > "Aspect"
Settings
Through Does not convert the aspect ratio.
Outputs 4:3 video signals to a 16:9 TV with black bands on either side of
16:9 Normal
the screen.
Note
This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or
2160p (4K) signals.

Setting the use of HDMI Control

Enables/disables HDMI Control. HDMI Control allows you to operate external devices
via HDMI.
Setup menu
"Video/HDMI" > "HDMI Control" > "HDMI Control"
Settings
Off Disables HDMI Control.
Enables HDMI Control.
On
Configure the settings in "TV Audio Input", "ARC" and "Standby Sync".
Note
To use HDMI control, you need to perform the HDMI Control link setup after connecting HDMI Control-
compatible devices. For details, see the following:
▪ "HDMI Control and synchronized operations" (p.186)

Setting the audio jack used for TV audio input

Selects an audio input jack of the unit to be used for TV audio input when "HDMI
Control" is set to "On". The unit's input source automatically switches to TV audio when
the TV input is switched to its built-in tuner.
Note
For details on "HDMI Control" in the "Setup" menu, see the following:
▪ "Setting the use of HDMI Control" (p.128)
Setup menu
"Video/HDMI" > "HDMI Control" > "TV Audio Input"
Settings
AV 1–2, AUDIO 1–5
Note
When using ARC to input TV audio to the unit, the input jacks selected here will be used for TV Audio Input.

Setting the use of ARC

Select whether to output TV audio to the speakers connected to the unit when "HDMI
Control" is set to "On".
Note
For details on "HDMI Control" in the "Setup" menu, see the following:
▪ "Setting the use of HDMI Control" (p.128)
Setup menu
"Video/HDMI" > "HDMI Control" > "ARC"
Settings
Off Disables ARC.
On Enables ARC.
Note
You do not need to change this setting normally. In case noises are produced from the speakers connected
to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set "ARC" to "Off"
and use the TV's speakers.
128
En