Setting Up A Wireless Connection Using The Wps Button; Setting Up A Wireless Connection Using An Ios Device - Yamaha Aventage RX-A780 Owner's Manual

Setting up a wireless connection using the WPS
button
You can easily set up a wireless connection with one push of the WPS button.
Setup menu
"Network" > "Network Connection" > "Wireless(Wi-Fi)"
1
Use the cursor keys to select "WPS Button" and press ENTER.
2
Use the cursor keys to select "NEXT" and press ENTER.
3
Read the on-screen description and push the WPS button on the
wireless router (access point).
4
Use the cursor keys to select "CONNECT" and press ENTER.
When the connection process finishes, "Completed" appears on the front
display.
If "Not connected" appears, repeat from step 1 or try another connection
method.
This completes the network settings.
Note
▪ The unit may not connect to the wireless router (access point) using WEP as the encryption method. In
this case, try another connection method.
▪ You can use INFO (WPS) on the front panel. Hold down INFO (WPS) for a few seconds to set up a
wireless connection and then "Press WPS button on Access Point" appears on the front display, push the
WPS button.
About WPS
▪ WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy
establishment of a wireless home network.

Setting up a wireless connection using an iOS device

You can set up a wireless connection by applying the connection settings on iOS
devices (iPhone/iPad/iPod touch).
Before proceeding, confirm that your iOS device is connected to a wireless router.
Note
▪ This process will restore the default settings for the following.
– Network settings
– Bluetooth settings
– Bluetooth, USB, media server and network content registered as shortcuts
– Internet radio stations registered to "Favorites"
– Account information for the network services
▪ You need iOS device with iOS 7 or later. (The following procedure is a setup example for iOS 10.)
▪ This configuration does not work if the security method of your wireless router (access point) is WEP. In
this case, use other connection method.
Setup menu
"Network" > "Network Connection" > "Wireless(Wi-Fi)"
170
En