Yamaha Aventage RX-A780 Owner's Manual page 32

n
VIDEO (composite video) connection with a video
device
Connect a video device to the unit with a video pin cable and a stereo pin cable.
Output jacks on video device
Video Audio
Composite video Analog stereo
The unit (rear)
TRIGGER OUT
12V 0.1A
AV 2 (VIDEO) jack
HDMI OUT
IN
( HDCP2.2 )
2 1 1
OUT ARC (1 MOVIE)
REMOTE VIDEO
ANTENNA
AUDIO 1
( 7 TV ) ( 2 RADIO )
FM AM
OPTICAL
AUDIO 2
( 3 MUSIC )
V
OPTICAL
AUDIO 3
AV 1 AV 2
COMPONENT VIDEO VIDEO
COAXIAL
COAXIAL Y P P
B R
ZONE
PHONO AUDIO 4 AUDIO 5 L
L
GND
R
R
AV 2 (AUDIO) jacks
Note
If the combination of video/audio input jacks available on the unit does not match your video device, change
its combination according to the output jacks of your device. For details, see the following:
▪ "Combining audio of another input source with video of the current input source" (p.140)
n
AUDIO connection with an audio device such as a CD
player
Connect audio devices such as CD players and MD players to the unit. Depending on
the audio output jacks available on your audio device, choose one of the following
connections.
Input jacks on the unit
AV 2 (VIDEO + AUDIO)
Video output
(composite video)
VIDEO
V
Video device
L
L
R
R
Audio output
(analog stereo)
Audio output jacks on audio device
Digital optical
Digital coaxial
Analog stereo
Turntable (PHONO)
The unit AV 1-2 jacks
(rear) AUDIO 1-5 jacks
TRIGGER OUT
12V 0.1A
HDMI ( HDCP2.2 )
HDMI OUT
IN ( )
HDCP2.2
2 1 1 2 3 4
OUT ARC (1 MOVIE) (5 STB) (6 GAME)
REMOTE
AUDIO 1 ANTENNA
( 7 TV ) ( 2 RADIO )
FM
AM O
OPTICAL
AUDIO 2
( 3 MUSIC ) OPTICAL
OPTICAL
AUDIO 3
AV 1 AV 2
COMPONENT VIDEO VIDEO
COAXIAL
C
COAXIAL
COAXIAL Y P B P R
ZONE OUT PRE OUT
ZONE 2 FRONT SUBWOOFER
PHONO AUDIO 4 AUDIO 5
1
L
GND
2
R
PHONO
L
GND
R
Ground lead
PHONO jacks
Note
▪ The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a low-output
MC cartridge, use a boosting transformer.
▪ Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.
▪ "AUDIO1" is set as TV audio input at the factory. If you have connected any external device to the AUDIO
1 jacks, use "TV Audio Input" in the "Setup" menu to change the TV audio input assignment. To use the
SCENE function, you also need to change the input assignment for SCENE (7). For details, see the
following:
– "Setting the audio jack used for TV audio input" (p.128)
– "Registering a scene" (p.89)
32
En
Audio input jacks on the unit
AUDIO 1–2 (OPTICAL)
AUDIO 3 (COAXIAL)
AV 1 (COAXIAL)
AUDIO 4–5 (AUDIO)
AV 2 (AUDIO)
PHONO
Audio output
(either digital optical, digital coaxial, or
analog stereo)
O
OPTICAL
C
COAXIAL
Audio device
L
L
R
R
PHONO
L
L
R
R
GND
Turntable
Audio output (PHONO)