Removing The Limitation On Hdmi Video Output (Mon.chk); Restoring The Default Settings (Init); Updating The Firmware (Update); Checking The Firmware Version (Version) - Yamaha RX-V6671 Owner's Manual

Removing the limitation on HDMI video output
(MON.CHK)
MON.CHK - YES
This unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jacks.
If you want to select a resolution in "Resolution" (p.94) regardless of the detection
results or if this unit does not detect it correctly, disable the monitor check function.
Settings
Enables the monitor check function. (Outputs video signals with a
YES (default)
resolution supported by the TV only.)
Disables the monitor check function. (Outputs video signals with a
SKIP
specified resolution regardless of compatibility with the TV.)
• In case this unit becomes inoperable because videos from this unit cannot be displayed on the TV after
"MON.CHK" is set to "SKIP", reset the setting to "YES".

Restoring the default settings (INIT)

INIT- CANCEL
Restores the default settings for the selected item.
Choices
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for this unit.
CANCEL Does not perform an initialization.

Updating the firmware (UPDATE)

New firmware will be released irregularly for the purpose of additional features or
product improvements. It can be downloaded from our website. If this unit is connected
to the Internet, you can download the firmware via the network. For details, refer to the
information supplied with updates.
VOL.
MUTE
UPDATE- USB
■
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select "USB" or "NETWORK" and press INFO to start
firmware update.
Choices
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
• If this unit detects a newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the firmware of this unit by following the
procedure in "Updating the firmware of this unit" (p.107).

Checking the firmware version (VERSION)

Check the version of firmware currently installed on this unit.
VOL.
MUTE
VERSION- x.xx
• You can also check the firmware version in "System" (p.101) in the "Information" menu.
SW
PL PR
C
L R
SL SR
SBL SB SBR
SW
PL PR
C
L R
SL SR
SBL SB SBR
103
En