Linking The Standby Modes Of The Unit And The Tv; Setting The Output Of Hdmi Audio From The Tv Speaker; Setting The Version Of Hdcp Used On The Hdmi Input Jacks; Setting The Use Of Hdmi Standby Through - Yamaha Aventage RX-A780 Owner's Manual

Linking the standby modes of the unit and the TV

Select whether to use HDMI control to link the unit's standby mode to the TV's power
when "HDMI Control" is set to "On".
Note
For details on "HDMI Control" in the "Setup" menu, see the following:
▪ "Setting the use of HDMI Control" (p.128)
Setup menu
"Video/HDMI" > "HDMI Control" > "Standby Sync"
Settings
Off Does not set the unit to standby mode when the TV is turned off.
On Sets the unit to standby mode when the TV is turned off.
Sets the unit to standby mode when the TV is turned off only when the unit
Auto
is receiving TV audio or HDMI signals.
Setting the output of HDMI audio from the TV
speaker
Enables/disables audio output from a TV connected to the HDMI OUT jack.
Note
▪ The "HDMI OUT1" setting is available only when "HDMI Control" is set to "Off".
▪ For details on "HDMI Control" in the "Setup" menu, see the following:
– "Setting the use of HDMI Control" (p.128)
Setup menu
"Video/HDMI" > "HDMI Audio Output" > "HDMI OUT1"/"HDMI OUT2"
Settings
Off Disables audio output from the TV.
On Enables audio output from the TV.
Setting the version of HDCP used on the HDMI input
jacks
Selects the HDCP version of the HDMI input jacks for watching 4K video content.
Setup menu
"Video/HDMI" > "HDCP Version"
Input sources
HDMI 1–5
Settings
Auto Automatically sets the version of HDCP according to content.
1.4 Sets the version of HDCP to always be 1.4.

Setting the use of HDMI Standby Through

Select whether to output video/audio (input through HDMI jacks) to the TV when the
unit is in standby mode.
Note
If this function is set to "On" or "Auto", you can use the input selection keys (HDMI 1–5) to select an HDMI
input even when the unit is in standby mode (the standby indicator on the unit blinks).
Setup menu
"Video/HDMI" > "HDMI Standby Through"
Settings
Off Does not output video/audio to the TV.
Automatically selects whether to output video/audio depending on the
Auto
status of the connected device.
Outputs video/audio to the TV.
On
(The unit consumes more power than when "Off" or "Auto" is selected.)
Note
▪ "Off" is not selectable when "HDMI Control" is set to "On".
▪ For details on "HDMI Control" in the "Setup" menu, see the following:
– "Setting the use of HDMI Control" (p.128)
129
En