Automatically Changing The Input Source Names Displayed On The Front Display; Manually Changing The Input Source Names Displayed On The Front Display - Yamaha Aventage RX-A780 Owner's Manual

Automatically changing the input source names
displayed on the front display
Automatically changes the input source names displayed on the front display. You can
select a name created by the Auto Rename function.
Setup menu
"System" > "Input Rename"
Input sources
HDMI 1-5, AV 1, AUDIO 1-3
1
Use the cursor keys to select an input source to be renamed.
2
Use the cursor keys to select "Auto".
3
To change another input source name, repeat steps 1 to 2.
4
Press SETUP.
This completes the settings.
Note
When "Auto" is selected, the created name is saved even after the external device is disconnected. To reset
to the default setting, switch the setting to "Manual" and then back to "Auto".
Manually changing the input source names
displayed on the front display
Allows the input source names displayed on the front display to be set manually.
Setup menu
"System" > "Input Rename"
Input sources
HDMI 1-5, AV 1-2, AUX, AUDIO 1-5, PHONO, TUNER, MusicCast Link, SERVER, NET
RADIO, Bluetooth, USB
1
Use the cursor keys to select an input source to be renamed.
Note
If the input source is set to "Auto", use the cursor keys to select "Manual".
2
Press ENTER.
The cursor moves to the name edit screen.
3
Use the cursor keys and ENTER to edit the name.
Note
▪ To cancel the entry, select "CLEAR".
▪ To restore the default name, select "RESET".
4
Use the cursor keys to select "SAVE" and press ENTER.
5
To change another input source name, repeat steps 1 to 4.
6
Press SETUP.
This completes the settings.
142
En