Yamaha Aventage RX-A780 Owner's Manual page 105

Menu Item
Surround Decoder
7ch Stereo
Sound
Dynamic Range
Volume
Adaptive DSP Level
Virtual Speaker
Scene Setting
Scene
Scene Rename
Information
Video Mode
Video/HDMI
HDMI Control
HDMI Audio Output
HDCP Version
HDMI Standby Through
Function
Decode Type Selects a surround decoder to be used in combination with the selected sound program.
Center Spread Selects whether to spread the center channel signals to left and right when 2-channel source is played.
Center Image Adjusts the center localization (broadening effect) of the front sound field.
Adjusts the entire volume for "7ch Stereo".
Level
Front / Rear Balance Adjusts the front and rear volume balance for "7ch Stereo".
Left / Right Balance Adjusts the left and right volume balance for "7ch Stereo".
Height Balance Adjusts the height volume balance using the presence speakers for "7ch Stereo".
Monaural Mix Enables/disables monaural sound output for "7ch Stereo".
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Max Volume Sets the limit value of the volume.
Initial Volume Sets the initial volume for when this receiver is turned on.
Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted.
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers.
VSBS
Selects items to be included as the scene assignments.
Renames the scene name displayed on the front display or TV screen.
Displays information about the current video signal and the TVs connected to the HDMI OUT jacks.
Video Mode Enables/disables the video signal processing.
Selects a resolution to output HDMI video signals.
Resolution
Aspect Selects an aspect ratio to output HDMI video signals.
HDMI Control Enables/disables HDMI Control.
TV Audio Input Selects an audio input jack of the unit to be used for TV audio input.
Enables/disables ARC.
ARC
Standby Sync Selects whether to use HDMI control to link the standby behavior of the TV and the unit.
Enables/disables the audio output from a TV.
Selects the version of HDCP used on the HDMI input jacks.
Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
105
En
Page
p.121
p.122
p.122
p.122
p.122
p.122
p.123
p.123
p.123
p.123
p.124
p.124
p.124
p.125
p.126
p.127
p.127
p.127
p.128
p.128
p.128
p.128
p.129
p.129
p.129
p.129