Error Messages From Ypao - Yamaha Aventage RX-A780 Owner's Manual

Error messages from YPAO

If any error message is displayed during the measurement, resolve the problem and
perform YPAO again.
TV screen
Error message
ERROR 1
Front speakers are not
detected.
ERROR 2
One of the surround speakers
cannot be detected.
ERROR 3
One of the front presence
speakers cannot be detected.
Error message
ERROR 4
One of the surround back
speakers cannot be detected.
ERROR 5
The noise is too loud.
ERROR 6
Surround back speakers are
connected, but no surround
speakers are connected.
ERROR 7
The YPAO microphone has
been removed.
ERROR 8
The YPAO microphone cannot
detect test tones.
ERROR 9
Canceled by user operation
ERROR 10
An internal error has occurred.
Note
▪ To exit the YPAO measurement for resolving the problem, use the cursor keys to select "Quit" and press
ENTER.
▪ For the ERROR 5 and ERROR 9 messages only, you can proceed with the current YPAO measurement.
Use the cursor keys to select "Proceed" and press ENTER.
▪ To retry the YPAO measurement from beginning, use the cursor keys to select "Retry" and press ENTER.
46
En
Remedy
Exit YPAO, turn off the unit, and then check the speaker
connections.
Keep the room quiet and retry YPAO. If you select "Proceed",
YPAO takes the measurement again and ignores any noise
detected.
Surround speakers need to be connected in order to use
surround back speakers. Exit YPAO, turn off the unit, and then
reconnect the speakers.
Connect the YPAO microphone to the YPAO MIC jack firmly
and retry YPAO.
Connect the YPAO microphone to the YPAO MIC jack firmly
and retry YPAO. If this error occurs repeatedly, contact the
nearest authorized Yamaha dealer or service center.
Retry or exit YPAO as necessary. To exit the YPAO, use the
cursor keys to select "Quit" and press ENTER.
Exit YPAO, and turn off and on the unit. If this error occurs
repeatedly, contact the nearest authorized Yamaha dealer or
service center.