Setting The Equalizer - Yamaha Aventage RX-A780 Owner's Manual

Setting the equalizer

Selects the type of equalizer to be used and adjusts the tone.
Setup menu
"Speaker" > "Parametric EQ" > "Parametric EQ"
Settings
Manual Select this option when you want to adjust the equalizer manually.
YPAO:Flat Adjusts individual speakers to achieve the same characteristics.
Adjusts individual speakers to achieve the same characteristics as the
YPAO:Front
front speakers.
YPAO:Natural Adjusts all speakers to achieve a natural sound.
Through Does not use the equalizer.
Note
"YPAO:Flat", "YPAO:Front", and "YPAO:Natural" are available only when the YPAO measurement results
have already been saved. Press ENTER again to view the YPAO measurement results. For details on the
YPAO, see the following:
▪ "Optimizing the speaker settings automatically (YPAO)" (p.42)
When selecting "Manual"
1
Set "Parametric EQ" to "Manual" and press ENTER.
2
Press ENTER again to enter the edit screen.
3
Use the cursor keys to select a speaker and press ENTER.
Note
▪ To restore the default settings for all speakers, select "PEQ Data Clear" and then "OK".
▪ To copy the parametric equalizer values acquired with the YPAO measurement results to the
"Manual" fields for fine adjustment, select "PEQ Data Copy" and then an equalizer type.
4
Use the cursor keys to select a center frequency from the 7 preset
bands (4 for subwoofer).
5
To fine-adjust the center frequency, Q factor (bandwidth) or gain,
use the cursor keys to select an item.
Freq.: Use the cursor keys to adjust the center frequency of the selected
band.
Q: Use the cursor keys to adjust the Q factor (bandwidth) of the selected
band.
Gain: Use the cursor keys to adjust the gain of the selected band.
Setting range
Center frequency: 15.6 Hz to 16.0 kHz (15.6 Hz to 250.0 Hz for
subwoofer)
Q factor: 0.500 to 10.080
Gain: -20.0 dB to +6.0 dB
6
Press SETUP.
This completes the settings.
113
En