Configuring The Multi Zone Settings; Checking The Zone2 Information; Setting The Use Of Volume Adjustments For Zone2 Output; Setting The Zone2 Limit Value Of The Volume - Yamaha Aventage RX-A780 Owner's Manual

Configuring the multi zone settings

Checking the Zone2 information

Displays information about Zone2.
Setup menu
"Multi Zone" > "Information"
On/Off The power on/off for Zone2
Input The input source selected for Zone2
Volume The volume setting for Zone2
Tone Control The tone control setting (the level of Treble and Bass) for Zone2
Note
Use the left/right cursor keys to display other informations in the "Setup" menu.
Setting the use of volume adjustments for Zone2
output
Enables/disables volume adjustments for Zone2 output.
If you have connected an external amplifier with volume control to the unit, disable
volume adjustments for Zone2.
Setup menu
"Multi Zone" > "Zone2" > "Volume"
Settings
Fixed Disables volume adjustments for Zone2 output.
Variable Enables volume adjustments for Zone2 output.
Note
"Volume" is automatically set to "Variable" when "Power Amp Assign" is set to "7.1 +1Zone" or "5.1.2
+1Zone". For details on "Power Amp Assign" in the "Setup" menu, see the following:
▪ "Setting your speaker system" (p.108)

Setting the Zone2 limit value of the volume

Sets the Zone2 limit value of the volumes.
Setup menu
"Multi Zone" > "Zone2" > "Max Volume"
Setting range
-60.0 dB to +10.0 dB (5.0 dB increments) [20.5 to 90.5 (5.0 increments)]
Note
▪ This setting is not available when "Volume" is set to "Fixed". For details, see the following:
– "Setting the use of volume adjustments for Zone2 output" (p.135)
▪ For details on the scale of the volume display (dB unit or numeric value), see the following:
– "Setting the scale of the volume display" (p.144)
135
En