Omron SYSMAC-SE20 Series Startup Manual page 36

2
When the code is imported to the Sysmac Studio, the BOOL variables are added as
shown below.
3
The program to call the function block is written in the ladder diagram language as
shown below.
Additional Information
Refer to the Sample File No. 6 PLCCoderDemoMC_LD.mdl that is provided separately
for the Simulink model used in this section.
Refer to the Sample File No. 7 PLCCoderDemoMC_LD.smc that is provided separately
for the program used in this section.
34