Omron SYSMAC-SE20 Series Startup Manual page 23

4
Select Run from the Simulation Menu of the Sysmac Studio.
5
Double-click TestBench in the Multiview Explorer to display the program.
6
Confirm that testVerify is True and testCycleNum is the value of
TEST_CYCLE_COUNT written in the comment.
You can confirm that calculation accuracy of the output data is the same level as the
Simulink (within the acceptable error range) if testVerify is True.
You can also confirm that the simulation has been completed if testCycleNum is the
value of TEST_CYCLE_COUNT written in the comment.
21