Table of Contents
Advertisement
2.1 Digital Display
1
1 Coupling status:
Indicates the coupling status. While measurements are taken, the coupling status
should be on. If it isn't or if it isn't stable, the instrument has got difficulties in achiev-
ing stable measurements and the thickness value displayed will most likely be erro-
neous.
2 Unit:
Current unit system. MM or IN for thickness value.
3 Battery information:
Displays the rest capacity of the battery.
4 Information Display:
Displays the measured thickness value, the sound velocity and shows hints of the
current operation.
2.2 Keypad definition
Turn the instrument on/off
Turn on/off the EL back-
light
Zero operation
Unit switch between Met-
ric and Imperial system
Data Save or Data Delete
3 Preparation
3.1 Transducer selection
With this instrument it is possible to measure a wide range of different materials,
started from various metals to glass and plastics. These different types of material
require the usage of different transducers. Choosing the correct transducer is the
most important thing to perform accurate and reliable measurements. Generally
6
M/S or IN/µS for sound velocity.
Sound velocity calibration
Enter
Plus;
Turn on/off Scan mode
Minus;
Turn on/off the beep mode
TN_US-BA-e-1814
Advertisement
Table of Contents
