SMART Board 6065 HD Installation And Maintenance Manual page 39

CHAPTER 5
ORIENTING AND CALIBRATING THE DISPLAY
To calibrate the display when connected to a computer
1. Open SMART Settings:
Operating
system
Windows 10
Windows 8
Windows 7
macOS
SMART Settings appears.
2. Press SMART Hardware Settings.
3. If more than one SMART product is connected to your computer, select the display.
4. Select Advanced Settings from the drop-down list.
5. Press Calibrate, and then follow the on-screen instructions.
The calibration screen appears. This can take a few moments.
6. Press the red target with the tip of a pen. Hold the tip at the center of the target until the target
turns green, and then lift the pen.
The target moves to the next location.
NOTE
You can calibrate a target again by pressing the LEFT ARROW key on your keyboard.
31 smarttech.com/kb/171204
Procedure
a. Select Start.
b. Scroll to and select SMART Technologies > SMART Settings.
a. Open the Apps screen.
b. Scroll to and select SMART Technologies > SMART Settings.
Select Start > All Programs > SMART Technologies >
SMART Tools > SMART Settings.
a. Press the SMART Board icon
b. Press SMART Settings.
on the Mac menu bar.