SMART Board 6065 HD Installation And Maintenance Manual page 13

CHAPTER 1
WELCOME
No. Name
1 Standby
2 Select
3
Mute
4 Decrease
5 Increase
6 Move Up
7 Move Down
8 Menu
IMPORTANT
If there is a film over the front control panel, remove it before using the front control panel.
l
If the buttons don't respond when you press them, the front control panel might have been
l
disabled (see FBC Control on page 49). To re-enable the front control panel, press the
Standby button until the buttons light.
In normal operation, all buttons are white.
5 smarttech.com/kb/171204
Procedure
Press to exit Standby mode.
l
Press twice to enter Standby mode.
l
Press and hold to reset the display.
l
If the on-screen display menu isn't open, press to switch
l
inputs.
If the on-screen display menu is open, press to open the
l
currently selected menu.
Press to mute or unmute the volume.
l
Press and hold to freeze and unfreeze the screen.
l
If the on-screen display menu isn't open, press to decrease
l
the volume.
If the on-screen display menu is open, press to decrease the
l
value of the currently selected option.
If the on-screen display menu isn't open, press to increase the
l
volume.
If the on-screen display menu is open, press to increase the
l
value of the currently selected option.
Press to move to the previous option in the current menu.
Press to move to the next option in the current menu.
If the on-screen display menu isn't open, press to open the on-
l
screen display menu.
If the on-screen display menu is open, press to return to the
l
previous menu.
Press and hold to close the on-screen display menu.
l