Work Mode Setting; Software Update - Salus Multi-Mix Operation And Installation Manual

Work mode setting

It is possible to select work mode which is
suitable for user's
operating mode can be selected directly on
the main window, press the mode icon.
Work mode
OFF The controller switch off a
particular heating circuit or
DHW
function
provided that is in active in
service menu. Activating this
mode also disables the heat
source. The heat source is not
switched off when the heating
function of the buffer is active.
AUTO Preset room temperature is
switched between "DAY" and
"NIGHT"
depending on clock indications
and defined time programs for
particular days of the week.
DHW tank is loaded during a
period corresponding to "DAY"
temperature.
programs
"NIGHT"
DHW tank is off.
DAY Comfort mode.
In the
preset temperature is constant
or depending on the weather
and corresponds the entered
"DAY"
maintains
temperature.
NIGHT Economy mode.
In the
"NIGHT"
temperature is decrease by the
entered
possible to select this mode for
DHW tank.
Auto-Eco Preset room temperature is
maintained within defined time
periods as "DAY" temperature.
Circuit
requirements.
tank. Anti – freeze
remains active
temperatures
For time
corresponding
temperature, the
heating circuit the
value. HUW tank
constant preset
heating circuit
mode, the preset
value.. It is not
is off outside the
The
Work mode can be selected separately for
each heating circuit and separately for DHW
tank. Auto-Eco and NIGHT modes are not
available for HUW tank.
The operating modes are inactive
when the heating circuits are
controlled by thermostats with
ON-OFF contacts, because on the
thermostats
temperatures,
temperatures or time schedules.
Software can be modified with the use of
microSDHC memory card.
In order to change the program, insert the
memory card into a slot in the control panel.
to
New software should be saved in *.pfc format
on a memory card in a form of two files: file
with a program for the control panel and file
with a program for the controller A module.
in
Save new software directly on a memory card.
Do not nest data in a sub-folder.
Enter:
Basic settings
and exchange the program first in the
controller module and then in the control
panel.
12
defined time periods. Anti –
freeze function remains active
provided that is in active in
service menu. It is not possible
to select this mode for DHW
tank.
set
reduce

Software update

→
Software update
the preset
of the