Summer - Winter; Holiday Planning; Changing Names; Parental Lock - Salus Multi-Mix Operation And Installation Manual

of the week. Due to this, entering time periods
is quick and intuitive.
Operation within time periods for "DAY" and
"NIGHT":
„DAY" period
Heating The preset temperature is
circuits set as "DAY".
DHW tank is loaded up to
DHW tank
DHW preset temperature.
DHW
DHW transports heat from the
circulation DHW tank to a distant DHW
receivers.
Main heat
Active.
source
„NIGHT" period
Heating The preset temperature is
circuits set as "NIGHT".
DHW tank DHW tank is switch off.
DHW Circulating pump is switch
circulation off.
Main heat
Blockade.
source
The time programs are inactive
when the
controlled by thermostats (with ON-
OFF contacts type). Then on the
thermostats
temperature is set and schedule,
which affects the individual heating
circuits.

Summer - winter

Outside the heating season the controller can
be switched to SUMMER mode. It enables to
switched off heating circuits such as radiation
or floor heating and maintain operation of
DHW tank loading function.
SUMMER mode can be activated manually in
the menu:
→
Summer/Winter Summer mode = ON
SUMMER mode can
automatically. In order to do this, select:
Summer mode = AUTO. The controller will
enter SUMMER mode when the external
temperature exceeds the SUMMER activation
temperature parameter. The controller will
deactivate SUMMER mode when the external
circulating pump
heating circuits are
the room preset
be also activated
temperature
deactivation temperature parameter.
In
receivers can be turned off, so
make sure that the heat source will
not overheat before switching it
on.
Automatic switching into SUMMER
mode is possible only when the
external temperature sensor is
connected.

Holiday planning

The controller is equipped with a function
enabling to plan holiday, i.e. days during
which the user is outside his home. The
function is activated in the menu:
→
Basic settings
Enter holiday start and end date and set the
Activation = ON.
During these days heating circuits are turned
off. If frost protection mode is active, the frost
protection setpoint temperature is maintained
on the heating circuits. The DHW tank is not
charged.

Changing names

It is possible to change a default name of the
room thermostats and names of heating
circuits displayed in the controller, in the
menu:
→
Basic settings

Parental lock

It is possible to lock the touch screen against
children. Lock is activated in the menu:
→
Basic settings
Lock is activated automatically after a set
inactivity time. In
controller, press the screen in any place and
hold it for 4s.

Screen brightness adjustment

Three screen brightness levels are available:
„Edition" – screen brightness for editing
-
parameters,
„DAY" – screen brightness between 06:00
-
– 22:00,
„NIGHT" – screen brightness between
-
22:00 – 06:00.
11
drops below
SUMMER mode,
Holiday out of house
Change name
Parental control
order to unlock the
SUMMER
all heat