Controller Operation; Activating And Deactivating; Preset Temperature Settings; Time Programs - Salus Multi-Mix Operation And Installation Manual

8

Controller operation

Activating and deactivating

Press the switch
to activate the
controller?" message will be displayed.
Accept your choice in order to activate the
controller.
To deactivate the controller, press
button, search for
press it.
When
deactivated,
function will not work. Therefore,
it is recommended that instead of
switching off the controller, set
support of the heating circuits
and DHW to OFF from the service
menu.

Preset temperature settings

Heating circuits
Preset temperature in heating circuits can be
changed by clicking element no. 4 directly on
the main screen. Can be also changed in the
menu:
Preset temperatures
temperature
The preset water temperature in the heating
circuit is maintained on kept constant. In
addition, when setting the parameter Pump
lock by thermostat to YES, the circuit will be
switched off when the preset temperature has
been reached.
It is recommended to set the
parameter
thermostat to YES.
on the screen in order
controller. "Activate
in rotational menu and
the controller
an anti-freeze
→ →
H1...H3 DHW preset
Pump lock
DHW tank
Preset temperature in DHW tank can be
changed by clicking on a preset DHW tank
temperature in DHW window. In order to
enter DHW window, click
screen.
DHW preset temperature can be also entered
in the menu:
Preset temperatures
temperature
is

Time programs

The controller
programming time periods. In situation when
the user is outside his home or at night, the
controller
supplied
consumption.
Time programs are defined separately for
heating circuits,
circulation system. Time programs can be set
separately for each day of the week. Time
programs are entered in the menu Time
functions.
Should be select the decreasing of the preset
temperature as well as the beginning and
ending of the given time interval.
In the example below, a "NIGHT" period will
last from 00:00 till 06:00. "DAY" period will
last between 06:00 – 09:00. From 15:00 to
22:00 the "DAY" period was entered. "NIGHT"
period will last from 22:00 to 00:00.
by
After accepting the entered time period for a
particular day, the controller will propose a
possibility of saving this setting for other days
10
The edition of the
Preset water temperature
Pump lock by thermostat
possible only when selecting the
method of adjustment
Constant value from the service
menu.
in controller main
→
DHW tank loading
becomes active after connecting a
tank temperature sensor.
includes a
can decrease the
heat energy what
DHW tank
parameter
and
is
to a
DHW preset
function
function of
amount of
affects fuel
and DHW