ESIE13-03
|
Part 2. Troubleshooting
This part contains the following chapters:
1. Error codes .................................................................................17
2. Error code based troubleshooting...............................................20
1. Error codes
1.1. How to retrieve error codes
When a problem happens, an error code appears on the user interface. It is important to understand the problem and to take
countermeasure before resetting the error code.
If an error is present, it will immediately be displayed on the user interface screen. In case of a warning, the i-symbol (information)
will be blinking:
You can see the error code by pressing the i-button.
Now you can read the error code and a short indication about the problem.
For more information about troubleshooting, refer to
13/05/15
|
Version 2.0
Ground source heat pump
Part 2. Troubleshooting
"Error code based troubleshooting" on page
3. Symptom based troubleshooting ............................................... 37
4. Component checklist.................................................................. 54
1. Error codes
20.
Page 17