Table of Contents
Advertisement
3.4
Chipset menu
The Chipset menu items allow you to change configuration options for the North
Bridge and South Bridge.
3.4.1
System Agent (SA) Configuration
MAX TOLUD [Dynamic]
Allows you to select the maximum memory size of TOLUD (Top of Low Usable
DRAM). Configuration options: [Dynamic] [1 GB] [1.25 GB] [1.5 GB] [1.75 GB] [2
GB] [2.25 GB] [2.5 GB] [2.75 GB] [3 GB] [3.25 GB] [3.5 GB]
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [IGFX] [PCI]
Primary IGFX Boot Display [VBIOS Default]
Select the video device which will be activated during POST. This setting has
no effect if an external graphics device is present. The secondary boot display
selection appears based on your selection and the VGA mode is supported only on
primary display. Configuration options: [VBIOS Default] [DP1] [eDP] [LVDS] [DP2]
LVDS [Enabled]
Allows you to enable or disable LVDS (CH7511). Configuration options: [Disabled]
[Enabled]
LVDS Panel Type [1024x768 18bit, 60Hz]
Allows you to configure LVDs panel used by Internal Graphics Device.
Configuration options: [640x480, 18bit, 60Hz] [800x480, 18bit, 60Hz] [800x600,
18bit, 60Hz] [1024x600, 18bit, 60Hz] [1024x768, 18bit, 60Hz] [1024x768, 24bit,
60Hz] [1280x768, 24bit, 60Hz] [1280x1024, 48bit, 60Hz] [1366x768, 24bit, 60Hz]
[1440x900, 48bit, 60Hz] [1600x1200, 48bit, 60Hz] [1920x1080, 48bit, 60Hz]
[1920x1200, 48bit, 60Hz] [1280x800, 24bit, 60Hz] [12800x800, 18bit, 60Hz]
3.4.2
PCH-IO Configuration
HD Audio [Enabled]
This item controls the detection of HD Audio devices. Configuration options:
[Disabled] [Enabled]
PCIEX4_1 Gen Speed [Auto]
Configures the speed of PCIe x4 slot 1. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
Chapter 3: BIOS setup
3-9
Advertisement
Table of Contents
