Table of Contents
Advertisement
8.
Serial port connector (10-pin COM1)
This connector is for serial (COM) ports. Connect the serial port module cable
to this connector, then install the module to a slot opening at the back of the
system chassis.
MIX-Q370D1 Serial port connector
NOTE: The COM module is purchased separately.
9.
Digital I/O connector (10-pin DIO)
This connector includes 8 I/O lines (In/Out programmable). All of the Digital
I/O lines are programmable and each I/O pin can be individually programmed
to support various devices.
MIX-Q370D1 Digital I/O connector
NOTE: To configure the I/O pins in BIOS, go to the Advanced tab > Digital
IO Port Configuration. See section 3.3.10 Digital IO Port Configuration for
details.
2-22
MIX-Q370D1
DIO
PIN 1
MIX-Q370D1
COM1
PIN 1
MIX-Q370D1
Advertisement
Table of Contents
