Table of Contents
Advertisement
3.4
Chipset menu
The Chipset menu items allow you to change configuration options for the North
Bridge and South Bridge.
3.4.1
System Agent (SA) Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [IGFX] [PEG]
Primary IGFX Boot Display [VBIOS Default]
Select the video device which will be activated during POST. This setting has
no effect if an external graphics device is present. The secondary boot display
selection appears based on your selection and the VGA mode is supported only on
primary display. Configuration options: [VBIOS Default] [HDMI] [LVDS] [DP] [VGA]
PCIEX16 Gen Speed [Auto]
Allows you to select the PCI Express port speed. Configuration options: [Auto] [Gen1] [Gen2]
[Gen 3]
LVDS Panel Support [Auto]
Allows you to enable or disable LVDS Panel support. Configuration options: [Disabled]
[Enabled]
3.4.2
PCH-IO Configuration
HD Audio [Enabled]
This item controls the detection of HD Audio devices. Configuration options:
[Disabled] [Enabled]
3.5
Security menu
The Security menu items allow you to change the system security settings.
3.5.1
Administrator Password
If you have set an administrator password, we recommend that you enter the
administrator password for accessing the system. Otherwise, you might be able to
see or change only selected fields in the BIOS setup program.
To set an administrator password:
1.
Select the Administrator Password item and press <Enter>.
2.
From the Create New Password box, key in a password, then press <Enter>.
3.
Confirm the password when prompted.
Chapter 3: BIOS setup
3-9
Advertisement
Table of Contents
