Table of Contents
Advertisement
2.8.2
Internal connectors
1.
Internal power connectors (4-pin EATX_PWR2)
This connector is for an EATX power supply plug. The power supply plug
is designed to fit this connector in only one orientation. Find the proper
orientation and push down firmly until the connector completely fits.
MIX-Q370D1 1 x 4-pin (2x2) internal power connector
IMPORTANT:
•
•
2.
Speaker out connector (4-pin AMP_CON)
The 4-pin connector is for the chassis-mounted speaker.
MIX-Q370D1 Audio stere. output with Amp connector
The Speaker module is purchased separately.
2-18
EATX_PWR2
MIX-Q370D1
For a fully configured system, we recommend that you use a power supply
unit (PSU) that complies with ATX 12V Specification 2.0 (or later version).
We recommend that you use a PSU with higher power output when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
AMP_CON
PIN 1
MIX-Q370D1
PIN 1
MIX-Q370D1
Advertisement
Table of Contents
