Table of Contents
Advertisement
DIO Port 5~8 [Input]
Set DIO data flow as Input or Output. Configuration options: [Input] [Output]
3.4
Chipset menu
The Chipset menu items allow you to change configuration options for the North
Bridge and South Bridge.
3.4.1
North Bridge
Primary IGFX Boot Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [HDMI1] [eDP/LVDS] [HDMI2]
LVDS [Enabled]
Enable or disable LVDS (CH7511). Configuration options: [Disabled] [Enabled]
LVDS Panel Type [1024x768, 18bit, 60Hz]
Select the type of LCD panel used as display. Configuration options: [640x480, 18bit, 60Hz]
[800x480, 18bit, 60Hz] [800x600, 18bit, 60Hz] [1024x600, 18bit, 60Hz] [1024x768, 18bit,
60Hz] [1024x768, 24bit, 60Hz] [1280x768, 24bit, 60Hz] [1280x1024, 48bit, 60Hz] [1366x768,
24bit, 60Hz][1440x900, 48bit, 60Hz] [1600x1200, 48bit, 60Hz] [1920x1080, 48bit, 60Hz]
[1920x1200, 48bit, 60Hz] [1280x800, 24bit, 60Hz] [1280x800, 18bit, 60Hz]
3.4.2
South Bridge
Audio Controller [Enabled]
Configuration options: [Disabled] [Enabled]
PCIe Speed [Auto]
Configuration options: [Auto] [Gen 1] [Gen 2]
3.5
Security menu
The Security menu items allow you to change the system security settings.
3.5.1
Administrator Password
If you have set an administrator password, we recommend that you enter the
administrator password for accessing the system. Otherwise, you might be able to
see or change only selected fields in the BIOS setup program.
To set an administrator password:
1.
Select the Administrator Password item and press <Enter>.
2.
From the Create New Password box, key in a password, then press <Enter>.
3.
Confirm the password when prompted.
3-6
EMB-BSW1
Advertisement
Table of Contents
