Suzuki SX4 2016 Owner's Manual page 189

OPERATING YOUR VEHICLE
Setting Cruising Speed
Adaptive cruise control switch
EXAMPLE
(3)
(1)
(4)
(2)
(5)
54P000346
(1) Following distance setting switch
(2) "CRUISE" switch
(3) "CANCEL" switch
(4) "RES +" switch
(5) "SET –" switch
3-51
Information display
EXAMPLE
(7) (6)
(8) (9)
(10)
54P010315
(6) Following distance indicator
(7) Cruise indicator
(8) "SET" indicator
(9) Vehicle ahead detecting indicator
(10) Set speed indication
1) Turn on the adaptive cruise control sys-
tem by pushing "CRUISE" switch (2).
When the cruise indicator (7), following
distance indicator (6) and vehicle
ahead detecting indicator (9) appear on
the information display, you can set
cruising speed.
2) Accelerate or decelerate to the desired
speed.
3) Push "SET –" switch (5), "SET" indica-
tor (8) and set speed indication (10)
appear on the information display.
Take your foot off the accelerator pedal
and the set speed will be maintained. At
this time, vehicle ahead detecting indi-
cator (9) will vary as follows, depending
on the presence or absence of the vehi-
cle ahead.
Indication Description
A vehicle ahead is not
detected. In this case, the
vehicle is in the state of
constant-speed control.
A vehicle ahead
detected. In this case, the
vehicle is in the state of
deceleration control and
following control.
WARNING
If the cruising speed is accidentally
set, you could lose control of the
vehicle. This could lead to an acci-
dent, resulting in severe injury or
death.
Turn off the adaptive cruise control
system and check that the cruise
indicator (7) disappears when the
system is not in use.
83RM0-01E
is