Suzuki SX4 2016 Owner's Manual page 94

• When you reconnect the negative (–)
terminal to the battery, the value of driv-
ing range will be shown after driving for a
period of time.
Average Speed
If you selected average speed the last time
you drove the vehicle, the display indicates
the last value of average speed from
previous driving when the ignition switch is
turned to the "ON" position or the engine
switch is pressed to change the ignition
mode to "ON". Unless you reset the value
of average speed, the display indicates the
value of average speed which includes
average speed during previous driving.
To reset the value of average speed, push
and hold the indicator selector knob (2) for
about 2 seconds when the display indicates
an average speed. The display shows "---"
and then indicates a new average speed
after driving for a short time.
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the value of average
speed will be shown after driving for a
period of time.
Oil life (for diesel engine models)
The display indicates the remaining dis-
tance until the next timing of the engine oil
and oil filter change. When the remaining
distance becomes 0 km, the oil change
request light in the instrument cluster also
starts blinking to alert that you should
change the engine oil and oil filter immedi-
ately.
If you selected oil life the last time you
drove the vehicle, the display indicates "---"
for a few seconds and then indicates the
current distance until the next changing
engine oil when the ignition switch is
turned to the "ON" position or the engine
switch is pressed to change the ignition
mode to "ON".
Whenever the engine oil and oil filter are
changed, the oil life monitoring must be
reset in order to monitor the next oil and oil
filter change timing properly. To reset the
indicator, consult your SUZUKI dealer.
When the oil life monitoring is reset, the oil
life monitoring indicates 30000 km. If the
oil change request light was blinking, it will
go out.
BEFORE DRIVING
NOTICE
Change the engine oil and filter
immediately when the remaining dis-
tance of the oil life monitoring indica-
tion becomes close to 0 km. If you
keep operating the engine with 0 km
indication of oil life monitoring,
severe engine damage can result.
2-70
83RM0-01E