Suzuki SX4 2016 Owner's Manual page 283

OTHER CONTROLS AND EQUIPMENT
Temperature selector (1) / (2)
(1) / (2)
61MM0A022
Turn the temperature selector (1) / (2) to
adjust the temperature. The display (11)
shows the selected temperature.
NOTE:
If you turn the temperature selector (1) / (2)
until "HI" or "LO" appears on the display,
the climate control system will operate at
maximum heating or cooling. The tempera-
ture of the air from the outlets may change
suddenly while "LO" or "HI" is displayed,
but this is normal.
5-33
"DUAL" switch (3)
Every time you press the "DUAL" switch
(3), the temperature control mode switches
between the following:
Individual control mode (indicator ON):
The driver and passenger can make
temperature adjustments
pendently from their own temperature
selectors.
Combined control mode (indicator OFF):
If a temperature adjustment is made
from the driver's temperature selector
(1) or (2), the same adjustment is made
automatically on the passenger side.
NOTE:
If the passenger's temperature selector (1)
or (2) is turned while in the combined con-
trol mode, the individual control mode is
automatically set.
NOTE:
When you change the units of temperature
in the information display, the automatic
heating and air conditioning system tem-
perature display units will be changed
automatically. Refer to "Information Dis-
play" in the "BEFORE DRIVING" section
for details.
Blower speed selector (4)
(4)
inde-
(9)
Air flows out at a higher rate when you
press the right switch and at a lower rate
when you press the left switch.
If the "AUTO" switch (9) is pushed, the
blower speed will vary automatically as the
climate control system maintains the
selected temperature.
61MM0A023
83RM0-01E