Mirrors - Suzuki SX4 2016 Owner's Manual

To initialize the pinching prevention func-
tion, use the following procedure:
1) Turn the ignition switch to the "ON"
position or press the engine switch to
change the ignition mode to "ON".
2) Open the driver's window fully by hold-
ing the window switch in the "Down"
position.
3) Close the driver's window by holding
the switch in the "Up" position, and
keep holding the switch for 2 seconds
after the window fully closed.
4) Check the driver's window if the auto-
down/up feature work.
WARNING
Whenever you disconnect and recon-
nect the battery or replace the fuse,
the pinching prevention function
needs to be initialized.
The pinching prevention function will
not be activated until the initialization
complete.
If the auto-down/up feature would not work
after initialization, there might be some-
thing wrong with the pinching prevention
function. Have your vehicle inspected by
an authorized SUZUKI dealer.

Mirrors

Inside Rearview Mirror
68LMT0205
(1)
(2) (3)
68LMT0206
(2) Day driving
(3) Night driving
You can adjust the inside rearview mirror
by hand so as to see the rear of your vehi-
cle in the mirror. To adjust the mirror, set
the selector tab (1) to the day position,
then move the mirror up, down or sideways
by hand to obtain the best view.
BEFORE DRIVING
When driving at night, you can move the
selector tab to the night position to reduce
glare from the headlights of vehicles
behind you.
WARNING
• Always adjust the mirror with the
selector set to the day position.
• Only use the night position if it is
necessary to reduce glare from the
headlights of vehicles behind you.
Be aware that in this position you
may not be able to see some
objects that could be seen in the
day position.
83RM0-01E
2-22