Suzuki SX4 2016 Owner's Manual page 97

BEFORE DRIVING
• To change the minute indication, turn the
indicator selector knob (2) left or right
repeatedly when the minute indication
appears as reversed color. To change
the minute indication quickly, turn and
hold the indicator selector knob (2). To
set the minute indication, push the indi-
cator selector knob (2).
You can also switch the time indication
between 12-hour and 24-hour format.
Door Lock (Door lock setting)
You can choose either once or twice oper-
ation(s) to unlock all doors (including the
tailgate) or release the dead lock system (if
equipped) by turning the key, or operating
the keyless entry system transmitter, key-
less push start system remote controller or
request switch.
If your vehicle is equipped with the keyless
push start system, you can also turn off or
on the buzzer sound when the door(s)
is(are) locked or unlocked.
Lights (Light setting)
Foot light (Footwell lights setting)
The footwell lights can be programmed for
interlocked operation with either lighting
control or door operation and for no light-
ing.
Lane change (Turn signal lights setting)
The turn signal and its indicator can be set
whether they flash three times even if you
2-73
return the turn signal control lever immedi-
ately after moving it.
Antitheft (Theft deterrent alarm system
(if equipped) setting)
You can switch the theft deterrent alarm
system from the enabled state to the dis-
abled state, and vice versa.
The state of the theft deterrent alarm sys-
tem is shown on the information display as
follows:
• Mode A: Disabled state
• Mode D: Enabled state
Oil change (Oil life monitoring system
reset setting) (if equipped)
The oil life monitoring system must be
reset after changing the engine oil and oil
filter.
TPMS (Tire pressure monitoring system
setting)
• You can check the current tire inflation
pressure on the information display.
• You can set one of the initial value of tire
pressure below that is indicated on the
tire information label.
– Comfort Mode
– Eco Mode
– Load Mode
Refer to "Tire Pressure Monitoring System
(TPMS)" in the "OPERATING YOUR VEHI-
CLE" section for details.
IS A/C (ENG A-STOP system setting)
(if equipped)
• When using the automatic heating and
air conditioning system (if equipped),
you can select one of the following
engine auto stop settings.
– Standard
– Economy
– Comfort
• When "Economy" is selected, engine
auto stop condition is eased, compared
with "Standard". Engine auto stop condi-
tion will occur more frequently, the stop
time will be longer, leading to reduction
of fuel consumption.
• When "Comfort" is selected, engine auto
stop condition becomes severe, com-
pared with "Standard". Engine auto stop
condition will occur less frequently, the
stop time will be shorter, leading to more
comfortable cabin condition by air condi-
tioner.
Default (initialization setting)
If you select "YES" and push the indicator
selector knob (2), all settings will be reini-
tialized.
83RM0-01E