Suzuki SX4 2016 Owner's Manual page 58

NOTE:
The word "CENTER" is marked on the
buckle for the rear center belt. The buckles
are designed so a latch plate cannot be
inserted into the wrong buckle.
To unfasten the seat belt, push the red
"PRESS" button on the buckle and retract
the belt slowly while attaching a hand to
the belt or/and the latch plate.
Lap-Shoulder Belt with Detachable
Connector
EXAMPLE
The rear center lap-shoulder belt has a
60A039
buckle, a latch plate and a detachable con-
nector. The buckle is marked as "CEN-
TER" for distinction from the rear left seat
belt buckle. The rear center seat belt
buckle and the connector are designed so
as not to allow a wrong latch plate to be
inserted.
When the rear seatback is in the upright
position, keep the detachable connector
latched. Only when the rear seatback will
be folded down, unlatch the detachable
connector. To latch and unlatch the con-
nector, see "Unlatching and latching
detachable connector" later in this section.
BEFORE DRIVING
CENTER
(2)
(3)
Fastening
Before fastening the rear center lap-shoul-
der belt, make sure the detachable con-
61MM0A059
nector (1) is securely latched and the
webbing is not twisted.
To fasten the belt, sit up straight and well
back in the seat, pull the latch plate (2)
across your body and press it straight into
the buckle (3) until you hear a "click".
(1)
61MM0A060
2-34
83RM0-01E