Gear Oil - Suzuki SX4 2016 Owner's Manual

INSPECTION AND MAINTENANCE
Loosen
Tighten
NOTICE
• When installing the spark plugs,
screw them in with your fingers to
avoid stripping the threads.
Tighten the spark plugs with a
torque wrench to 25 Nm (2.5 kg-m,
18.4 lb-ft) for M16A engine models
or 18 Nm (1.8 kg-m, 13.5 lb-ft) for
K14C engine models. Do not allow
contaminants to enter the engine
through the spark plug holes when
the plugs are removed.
• Never use spark plugs with the
wrong thread size.
7-37
60G160
Spark plug gap "a"
M16A engine models:
K16HPR-U11
1.0 – 1.1 mm (0.039 – 0.043 in.)
K14C engine models:
ILZKR7D8
0.7 – 0.8 mm (0.027 – 0.031 in.)
NOTICE
When replacing spark plugs, you
should use the brand and type speci-
fied for your vehicle. For the speci-
fied plugs, refer
"SPECIFICATIONS" section at the
end of this book. If you wish to use a
brand of spark plug other than the
specified plugs, consult your SUZUKI
dealer.

Gear Oil

NOTE:
TCSS models are equipped with the tran-
saxle that requires infrequent mainte-
nance. You will never have to add and/or
change the oil. However, you should check
for oil leaks periodically. If you find any
leaks, ask your SUZUKI dealer to have the
transaxle inspected.
Manual Transaxle Oil/Transfer Oil
(4WD)/Rear Differential Oil (4WD)
54G106
When adding gear oil, use gear oil with the
appropriate viscosity and grade as shown
in the chart below.
We highly recommend you use:
"SUZUKI GEAR OIL 75W" for manual tran-
saxle gear oil.
Manual transaxle oil
75W
o
C -30 -20 -10 0
to the
o
-22
F -4 14 32
10 20 30 40
50 68 86 104
54P120706
83RM0-01E