Suzuki SX4 2016 Owner's Manual page 72

4) Push the child restraint toward the
anchorages so that the connecting bar
tips are partially hooked to the anchor-
ages. Use your hands to confirm the
position.
EXAMPLE
5) Grasp the front of the child restraint and
push the child restraint forcefully to
latch the connecting bars. Make sure
they are securely latched by trying to
move the child restraint system in all
directions, especially forward.
6) Attach the top strap referring to "Instal-
lation of Child Restraint with Top Strap"
section below.
Installation of Child Restraint with
Top Strap
Front
TOP TETHER
Some child restraint systems require the
54G185
use of a top strap. Top strap anchor brack-
ets are provided in your vehicle at the loca-
tions shown in the illustrations. The
number of the anchor bracket provided in
your vehicle depends on the vehicle speci-
fication. Install the child restraint system as
follows:
1) Remove the luggage compartment
cover (if equipped).
2) Secure the child restraint on the rear
seat using the procedure described
above for securing a restraint system
that does not require a top strap.
3) Hook the top strap to the anchor
bracket and tighten the top strap
according to the instructions provided
by the child restraint system manufac-
turer. Be sure to attach the top strap to
the corresponding
directly behind the child restraint. Do
not attach the top strap to the luggage
EXAMPLE
restraint loops (if equipped).
WARNING
Do not attach the child restraint top
strap to the luggage restraint loops (if
equipped). Incorrectly attached top
strap will reduce the intended effec-
tiveness of the child restraint system.
Type 1
61MM0A153
Type 2
BEFORE DRIVING
anchor located
86G032
2-48
83RM0-01E