Suzuki SX4 2016 Owner's Manual page 326

Deletion of audio device information
(Delete Audio)
Follow the instructions below to delete the
registered audio device information.
®
1) Press the Bluetooth setup button (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Setup Bluetooth", and
press the knob (2) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "List Audio", and press the
knob (2) to determine the selection.
4) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select an audio device to be
deleted, and press the knob (2) to
determine the selection.
5) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Delete", and press the
knob (2) to determine the selection.
6) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Delete?", and press the
knob (2) to determine the selection.
7) Turn "TUNE/FLD PUSH SOUND" knob
(2) to select "Confirm", and press the
knob (2) to complete the deletion.
NOTE:
When selecting "Go Back", the previous
menu will be displayed.
®
Disclaimer for Bluetooth function
• Depending on compatibility of mobile
®
phone models, no Bluetooth function
®
can be used, or some Bluetooth
tions may be restricted.
• Connectivity or voice quality may get
affected depending on circumstances.
• After the ignition switch is turned to "ON"
position or the engine switch is pressed
to change the ignition mode to "ON", the
audio system takes few seconds to
detect and connect to the Bluetooth
device (if already paired).
OTHER CONTROLS AND EQUIPMENT
Remote audio controls (if equipped)
Controlling basic functions of the audio
system is available using the switches on
func- the steering wheel.
(2)
(3)
®
(1)
(4)
5-76
83RM0-01E