2.1
Introduction
The following figures show the connectors on UNO-2484G. Information regarding
each peripheral is provided in the following sections.
Figure 2.1 Front panel of the UNO-2484G single-stack model
Figure 2.2 Front panel of the UNO2484G dual-stack model
2.2
UNO-2484G Interface
he UNO-2484G is equipped with four standard COM serial communication ports –
COM1, COM2, COM3, and COM4. The port settings can be adjusted from the BIOS
menu. Drivers are installed automatically during OS installation.
2.2.1
COM Port Interface (COM1, COM2, COM3, COM4)
The UNO-2484G features four RS-232/422/485, DB9, 50 ~ 115.2 kbps.
2.3
LAN: Ethernet Connector
UNO-2484G is equipped with a four Gigabit LAN controller. The controller chip used
is an Intel i210 Ethernet controller that is fully compliant with IEEE 802.3u 10/100/
1000 Base-T. The Ethernet port is a standard RJ-45 jack, and LED indicators are on
the front to show its Link (Green LED) and Active (Green LED) status.
2.4
Power Connector
The UNO-2484G is equipped with a phoenix power connector that is compatible with
10 ~ 36 V
external power and features reversed wiring protection. This protects
DC
the system from damage caused by reversed wiring of ground and power lines. (For
more information, refer to Appendix A.4.)
UNO-2484G User Manual
6